Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal

Constant- and varied-depth nanoscratching tests of GGG single crystal were carried out at different scratching velocities. The morphologies of the scratched grooves and chips were analysed using scanning electron microscope. The experimental results indicated that higher scratching velocity led to shallower penetration depth, shallower residual depth, and larger continuous chips. Increasing the scratching velocity could effectively improve the plasticity and reduce the brittle-to-ductile transition depth of GGG single crystal. Based on the contact stress and contact area between the analysed sample and Berkovich indenter, a model for predicting the penetration depth was developed, which took into account the strain rate effect and elastic recovery of materials. The model was verified using constant- and varied-depth nanoscratching tests, and the predicted and experimental results were in good agreement. Subsurface damage underneath the ductile surface was characterised using transmission electron microscope. The TEM results demonstrated that higher scratching velocity led to the slipping planes appearing in more directions, which prevented the generation of long slipping plane and reduced the depth of the damage layers. The plastic deformation of GGG at the scratching velocity of 100 μm/s was dominated by poly-crystalline nanocrystallites and amorphous phases, and was similar to that at the low scratching velocity. This study provided a fundamental understanding of the strain-rate dependence of surface/subsurface deformation mechanisms of GGG during ultra-precision machining.     

基于改进雷达图的配电系统电能质量评估方法

本文针对配电系统电能质量综合评估存在的评估指标权重分配过于主观或客观的问题,提出一种基于改进雷达图法的配电系统电能质量评估方法。该方法利用最小偏差组合权重法计算各评估指标的最优组合权重。并在传统雷达图的基础上对各指标轴间夹角值的确定和特征向量的选取两方面做了进一步的改进。首先采用扇形区域取代原始的三角形区域,并利用最小偏差组合权重法计算各指标轴间夹角值。其次选择新的特征向量构造评估函数对配电系统电能质量进行综合评估。最后通过对某钢铁厂棒材变电站10kV配电系统电能质量进行综合评估,验证了该方法的可行性和合理性。较传统雷达图而言,改进雷达图法解决了传统雷达图法中各指标间信息共用以及评估结果不唯一的问题,使评估结果更加准确合理。     

The effect of the exposed crystal plane on the antioxidant activity of nanoceria

Previous reports have noted that exposed crystal planes could affect the antioxidant activity of nanocerias, although the synthesized nanocerias used in those studies had different exposed crystal planes, as well as different sizes and morphologies. In order to better understand the effect of the crystal planes on the antioxidant activity of the materials, two types of nanocerias with similar morphology and size distribution but different crystal planes were synthesized using the hydrothermal method (CeO₂–H) and the ultrasonic template method (CeO₂–U). The antioxidant activities of the nanocerias were further explored within different ·OH concentrations in the reaction system. The experimental results showed that there is an obvious difference in the antioxidant activity of the two types of nanocerias in the lower free radical concentration system due to the effects of exposed crystal planes. CeO₂–U, with more active crystal planes (100), had stronger antioxidant activity. However, with the increase in the ·OH concentration in the reaction system, the difference in the antioxidant activity of the two nanocerias decreased. This research will increase our understanding of the antioxidant activity of the exposed crystal planes on nanocerias.     

Effects of temperature on creepage discharge characteristics in oil-impregnated pressboard insulation under combined AC–DC voltage

Due to the complexity of the valve side winding voltage of the converter transformer, the insulation characteristics of the oil-impregnated pressboard (OIP) of the converter transformer are different from those of the traditional AC transformer. The study on effect of temperature on the creeping discharge characteristics of OIP under combined AC–DC voltage is seriously inadequate. Therefore, this paper investigates the characteristics of OIP creepage discharge under combined AC–DC voltage and discusses the influence of temperature on creepage discharge characteristics under different temperatures from 70°C to 110 °C. The experimental results show that the partial discharge inception voltage and flashover voltage decrease with increasing temperature. The times of low amplitude discharge (LAD) decrease and amplitude of LAD increases. Simultaneously, the times of high amplitude discharge (HAD) gradually increase at each stage of creepage discharge with higher temperature. The analysis indicates that the charge carriers easily accumulate and quickly migrate directional movement along the electric field ahead of discharging. The residual charge carriers are more easily dissipated after discharging. The ‘hump’ region of LAD moves to the direction of higher discharge magnitude. The interval time between two continuous discharges is shortened obviously. The concentration of HAD accelerates the development of OIP insulation creepage discharge. The temperature had an accelerating effect on the development of discharge in the OIP under applying voltage.     

Nonreciprocal properties of 1D magnetized plasma photonic crystals with the Fibonacci sequence

In this paper, the nonreciprocal properties of a novel kind of 1D magnetized plasma photonic crystals(MPPCs) with the Fibonacci sequence are investigated. The isolation of the proposed 1D MPPCs is also used to analyze the nonreciprocal properties. Compared to the conventional 1D MPPCs with periodic structure, the nonreciprocal performance can be significantly improved.The effects of several parameters of the proposed 1D MPPCs on the nonreciprocal properties are studied by the transfer matrix method, which includes the incident angle, order of the Fibonacci sequence, plasma frequency, plasma cyclotron frequency and plasma filling factor. The obtained results show that the nonreciprocal propagation properties can be improved by increasing the values of the plasma cyclotron frequency and incident angle, but they will worsen by blindly increasing the order of the Fibonacci sequence, plasma frequency and filling factor of plasma.The peaks of transmittance also are obviously reduced. In addition, the value of isolation will increase with increasing the incident angle, order of Fibonacci sequence, plasma frequency and plasma filling factor. However, when the plasma cyclotron frequency is increased, the value of isolation will be increased at lower frequencies, but is almost unchanged at higher frequencies.     

板栗壳黄酮结构分析及其对胰脂肪酶活力的抑制作用

在分析板栗壳黄酮结构的基础上，研究其对胰脂肪酶的抑制作用及类型。采用醇提法提取板栗壳中的黄酮，并用AB-8大孔吸附树脂进行纯化，冻干后得到的黄酮含量为（107.50±1.00）mg/g，提取得率为（5.66±0.05）%。利用超高效液相色谱-四极杆/静电场轨道阱质谱联用技术对板栗壳黄酮进行结构分析，鉴定出8 种黄酮类化合物。采用对硝基苯酚法测定胰脂肪酶活力，分别考察板栗壳黄酮对胰脂肪酶的抑制效果及不同反应条件下板栗壳黄酮对胰脂肪酶活性的影响，结果表明，板栗壳黄酮对胰脂肪酶有较好的抑制作用，半抑制浓度（half maximal inhibitory concentration，IC50）为0.074 mg/mL，且使胰脂肪酶最适pH值向碱性偏移。通过Lineweaver-Burk双倒数作图法确定其抑制类型为非竞争性抑制，抑制常数Ki＝53.19 mg/mL。由此可见，板栗壳黄酮是一种效果良好的胰脂肪酶抑制剂。     

Ontology-based approach for the provision of simulation knowledge acquired by Data and Text Mining processes

Numerical simulation techniques such as Finite Element Analyses are essential in today's engineering design practices. However, comprehensive knowledge is required for the setup of reliable simulations to verify strength and further product properties. Due to limited capacities, design-accompanying simulations are performed too rarely by experienced simulation engineers. Therefore, product models are not sufficiently verified or the simulations lead to wrong design decisions, if they are applied by less experienced users. This results in belated redesigns of already detailed product models and to highly cost- and time-intensive iterations in product development.Thus, in order to support less experienced simulation users in setting up reliable Finite Element Analyses, a novel ontology-based approach is presented. The knowledge management tools developed on the basis of this approach allow an automated acquisition and target-oriented provision of necessary simulation knowledge. This knowledge is acquired from existing simulation models and text-based documentations from previous product developments by Text and Data Mining. By offering support to less experienced simulation users, the presented approach may finally lead to a more efficient and extensive application of reliable FEA in product development.     

基于Kӧtter方程的盾构掘进面上被切削土体受力研究

为了计算不同土体性质与不同掘进参数下盾构刮刀与土体之间的作用力以及由此带来的切削扭矩,引入了修正后的Kӧtter方程作为补充方程,求解出开挖面上土体在被动切削至破坏时滑动面上的应力分布,建立了被切削土体受力模型,求解出刮刀刃面与土体之间的正压力p、摩擦力Q与侧向土体间抗剪阻力U,进而推导出刀盘切削扭矩T的计算公式。分析得到特定刀盘上刮刀的p,Q,U值随土体c,φ值增大而增大,通过适当提高刮刀刃面粗糙度来增大摩擦可使土体更易被切至破坏;p,Q,U值随刀盘转速ω增大而减小,p,Q随支护荷载p线性增大且p对于被切削土体受力的影响在砂性土中较大,最终给出特定刀盘掘进至部分种类土体中的切削扭矩值作为工程参考。     

一种改进的最小二乘回归子空间分割方法

最小二乘回归(LSR)算法是一种常见的子空间分割方法，由于LSR具有解析解，因此它的聚类性能较高。然而LSR算法是应用谱聚类方法聚类数据，谱聚类方法初始化聚类中心是随机的，会影响后面的聚类效果。针对这一问题，提出一种基于聚类中心局部密度和距离这2个特点的改进的LSR算法（LSR-DC）。在Extended Yale B数据集上进行实验，结果表明，该算法有较高的聚类精度，具有一定的鲁棒性，优于现有LSR等子空间分割方法。     

高速率通信网络下时变系统的有限时域H∞控制

针对高速率通信网络和Round-Robin（RR）协议影响下网络化时变系统的有限时域[H∞]控制问题，考虑到系统中存在乘性噪声、随机时滞和量化效应，提出了一种基于观测器的有限时域[H∞]控制器的设计方法。利用李雅普诺夫稳定性理论和线性矩阵不等式（Linear Matrix Inequality，LMI）技术得到有限时域[H∞]控制器存在的充分条件。基于锥补线性化（Cone Complementarity Linearization，CCL）方法通过求解一组递归矩阵不等式得到观测器和控制器参数。所设计的控制器保证闭环网络化时变系统在给定的时域内稳定，且满足预定的[H∞]性能指标。数值仿真验证了所提方法的有效性。